Normal Operating Sounds - Haier QHEK18ACH1 Installation And User Manual

NORMAL OPERATING SOUNDS

• You may hear a pinging noise caused by water being picked up and thrown
against the condenser on rainy days or when the humidity is high. This
design feature helps remove moisture and improve efficiency.
• You may hear the thermostat click when the compressor cycles on and off.
• Water will collect in the base pan during high humidity or on rainy days. The
water may overflow and drip from the outdoor side of the unit.
• The fan may run even when the compressor does not.
• Water droplets being thrown against the outside coils can make a pinging
noise. This helps cool the condenser. You can reduce this noise by
removing the subbase water plug.
Removing this plug will lower the Energy Efficiency of your until.
NOTE: Do not drill hole in the base pan.
WIFI SETUP
Haier SmartHQ (for customers in the United States)
Haier SmartHQ Enabled*.
as shown below, your AC is Haier Appliances SmartHQ Enabled.
to communicate with your smart phone for remote monitoring, control and notifications.
Please download the SmartHQ App
features, and to learn what connected appliance apps will work with your smart phone.
SmartHQ: For assistance with the appliance or the ConnectPlus network connectivity (for models that are WiFi enabled or WiFi
optional), please call 1-800-220-6899.
14
If your Air Conditioner (AC) has a Connected Appliance Information label located on the outside
. For details go to Haierappliances.com to learn more about connected appliance
A WiFi communication card is built into the product allowing it
Network: GE_MODULE_XXXX
PASSWORD: XXXXXXXX
MAC ID: XX-XX-XX-XX-XX-XX
CONTAINS FCCID: 2ALD3-MKQTWIFI11 CONTAINS IC: 22987-MKQTWIFI11
49-5000567 Rev. 0