During an ongoing call, tap
Tap
to display the dialpad.
Enter the number of the recipient and tap
To switch to another call and put the current call on hold, tap
Conference calls
With a conference or multiparty call, you can have a joint conversation with two or
more persons.
For details about the number of participants that you can add to a conference call, contact
your network operator.
During an ongoing call, tap
To display the dialpad, tap
Dial the number of the second participant and tap
on hold temporarily.
To add the second participant to the call and start the conference call, tap .
To add more participants to the call, repeat the relevant steps as described
above.
During an ongoing conference call, tap
Tap the separate button of the participant with whom you want to have a
private conversation.
To end the private conversation and return to the conference call, tap .
During an ongoing conference call, tap
Tap
next to the participant you want to release.
During the conference call, tap
Voicemail
If your subscription includes a voicemail service, callers can leave voice messages for
you when you can't answer calls. Your voicemail service number is normally saved on
your SIM card. If not, you can get the number from your service provider and enter it
manually.
From the
, tap
Find and tap
>
.
Enter your voicemail number.
Tap
.
Open the dialpad.
Touch and hold
until your voicemail number is dialed.
The first time you call your voicemail number, your network operator's voicemail system
normally prompts you to set up your voicemail. For example, you may be asked to record a
greeting and set a password.
This is an internet version of this publication. © Print only for private use.
. The call log is displayed.
. The first call is put on hold.
. The call log appears.
.
. The first participant is put
.
.
>
>
71
.
.
.
>