Zenoah FMZ1200 Operator's Manual page 3

Product overview
7
8
9 10
1. Type plate
2. Lever to engage or disengage the drive
3. Battery
4. Throttle control/choke control
5. Ignition lock
6. Lift lever for the cutting deck
7. Rearward pedal
8. Forward pedal
9. Cutting height lever
10. Parking brake pedal
11. Lock button for parking brake
12. Seat adjustment
13. Fuel tank cap
14. Cover lock
Seat safety switch
The seat safety switch starts the safety circuit when the
operator lifts from the seat. The engine and the drive to
the blades stop if the blades are engaged or the parking
brake is not applied. See also
7 .
Control for throttle and choke
The throttle and choke control adjusts the engine speed
and engages the choke. Move the control forward to
increase the engine speed and rearward to decrease the
engine speed. Move the control to the top to engage the
choke. Use the choke to start the product when the
To start the engine on page 12 .
engine is cold. See
297 - 002 - 09.11.2017
6
11
Safety circuit on page
5 4 3
12 13
Forward and reverse pedals
The speed is steplessly adjusted with two pedals. Pedal
(1) is used to move forward, and pedal (2) to reverse.
The product brakes when the pedals are released.
Cutting deck
The product is used with a 2-in-1 cutting deck with
mulch function. The mulch function cuts the grass into
fertilizer. The 2-in-1 cutting deck can also be used
without the mulch function, for rear discharge of the
grass.
1 2
14
1
2
3