Tape Player; Playing A Tape; Continuous Play; Recording - RCA RS2601 User Manual

RS2602 EN 8/21/02 10:28 AM

Tape player

Playing a Tape

Tip: You can play a tape from either deck.
1. Press SOURCE repeatedly to select TAPE.
2. Open the cassette door.
3. Insert a tape into the door and push the door
closed.
4. Press REW /F.FWD
to the desired starting position. (Deck 1 Only)
5. Press PLAY to start playback .

Continuous Play

1. Insert a tape into deck 2 and start playback.
2. Insert a tape into deck 1 and press PLAY
PAUSE together.
3. When the tape in deck 2 finishes playback, PAUSE
at deck 1 will be released automatically and start
playback.

Recording

From Tuner

1. Insert a tape into deck 1.
2. Press SOURCE repeatedly to select TUNER and
press BAND to access the desired radio band.
3. Tune to the station to be recorded.
4. Press RECORD to begin recording.
5. Press STOP/EJECT
Page 13

From CD

1. Insert a tape into deck 1.
2. Press SOURCE repeatedly to select CD.
3. Insert the disc(s) to be recorded.
4. Select the track, CD, or program to be recorded.
5. Press RECORD
to position the tape 6. CD begins to play.
7. Press STOP/EJECT

Tape to Tape

1. Insert the destination tape in deck 1.
2. Insert the source tape into deck 2.
3. Press PAUSE
and 4. Press PLAY
recording start simultaneously.

From an Auxiliary Input

1. Insert the cassette in deck 1.
2. Check that the auxiliary device has been connect-
ed correctly to the AUX connector on the back of the
audio system.
3. Start playback on the auxiliary device.
4. Press RECORD
5.. Press STOP/EJECT
to end recording.
to begin recording.
to end recording.
and then RECORD on deck 1.
on deck 2. The playback and
on deck 1 to begin recording.
to end recording.
10
EN