BMW X7 Owner's Manual page 144

CONTROLS
3 Hook for upper retaining strap
4 Attachment point
5 Floor
6 Seat backrest
7 Upper retaining strap
Attaching the upper retaining
strap to the attachment point
1. Bring the seat of the second seat row into the
base position.
Reset to base position, refer to page 122.
2. Raise the head restraint, if needed.
3. Guide the upper retaining strap between or
along both sides of the supports for the head
restraint to the attachment point.
Middle seat: raise the head restraint, if
needed, press the button on the mounts for
this purpose. Guide the upper retaining strap
between or along both sides of the supports
of the head restraint to the attachment point.
4. If there is a retaining strap, run it between the
backrest and the cargo cover.
5. Hook the hook of the retaining strap to the at‐
tachment point.
6. Tighten the retaining strap by pulling it down.
7. Lower and engage head restraint as needed.
Locking the doors and
windows in the rear
General information
In certain situations it may be advisable to secure
the rear doors and windows, for instance when
transporting children.
144
Transporting children safely
Online Edition for Part no. 01405A385B6 - VI/21
Doors
Push the locking lever on the rear doors up.
The door can now be opened from the outside
only.
Safety switch for the rear
Press the button on the driver's door.
This disables various functions so that they can‐
not be operated from the rear.
Additional information:
Safety switch, refer to page 113.