Optional Module; Removing Optional Module - Dell OptiPlex 7070 Micro Service Manual

2. Install the
a. Side cover
3. Follow the procedure in

Optional module

Removing optional module

1. Follow the procedure in
2. Remove the :
a. Side cover
b. 2.5 inch hard drive assembly
3. To remove the optional card:
a. Disconnect the optional-card cable from the connector on the system board [1].
b. Remove the two (M2X3.5) screws and two screws that secure the optional card to the system chassis [2, 3].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 39