Table of Contents
Advertisement
MAINTENANCE
34
3
After drying the inner filter
completely, close the filter by pushing
down its center.
• Ensure the left and right side of the
inner filter is closed properly.
4
Insert the inner filter into the outer
filter.
Clean the outer filter
1
Remove the dust or lint around the
filter inlet.
CAUTION
• When the lint drops into the filter inlet,
it may cause degradation of drying
performance and increase in drying
time.
2
Pull out the outer filter.
3
Remove the inner filter.
4
Open the outer filter by unfolding in
the direction of the arrow grasping
the top edge of the outer filter.
5
Clean the residual lint using vacuum
cleaner or washing under running
water.
• Dry the filter completely if the filter
is moist. Failure to do so, odour
may occur in the appliance.
6
Close the outer filter while pushing
the side
of the filter.
A
NOTE
• Ensure the side of the filter is closed
properly. Failure to do so, any lint
accumulated on the filter may get into
the appliance and may cause
degradation of the drying
performance.
Advertisement
Table of Contents
