For Products With A; Water Dispenser; Child Safety; Compliance With Weee Directive And Disposing Of The Waste Product - Beko DSE 30000 User Manual

1

For products with a

water dispenser;

• Pressure for cold water
inlet shall be maximum
90 psi (6.2 bar). If your
water pressure exceeds
80 psi (5.5 bar), use a
pressure limiting valve
in your mains system. If
you do not know how
to check your water
pressure, ask for the
help of a professional
plumber.
• If there is risk of water
hammer effect in your
installation, always
use a water hammer
prevention equipment
in your installation.
Consult Professional
plumbers is you are not
1
• Do not install on the
• Use only potable water.

Child safety

• If the door has a lock,
• Children must be
Compliance with WEEE
Directive and Disposing of
the Waste Product:
(WEEE).
9
EN
sure that there is no
water hammer effect in
your installation.
hot water inlet. Take
precautions against
of the risk of freezing
of the hoses. Water
temperature operating
interval shall be 33°F
(0.6°C) minimum
and 100°F (38°C)
maximum.
the key should be kept
away from reach of
children.
supervised to prevent
them from tampering
with the product.
This product complies
with EU WEEE Directive
(2012/19/EU). This product
bears a classification
symbol for waste electrical
and electronic equipment