Table of Contents
Advertisement
Reference
Programming the Remote to Control
Your TV
To determine whether your remote needs to be programmed,
turn the TV on, point the remote at the TV, and press the TV
button. Then press CHAN UP or DOWN to see whether the TV
responds to the remote commands.
Follow these steps to program your remote to control your TV.
1. Turn on the TV.
2. Look up your brand and code number(s) on the TV Code list
on the following pages.
3. Press and hold the TV button.
4. Enter the code from the code list.
5. Release the TV button and press OFF•ON or CHAN UP/DOWN
to see if the TV responds to the remote commands. If it
doesn't, try the next code listed for your brand.
6. Repeat these steps until the TV responds to the remote
commands.
Programming the Remote to Control
Your VCR
To determine whether your remote needs to be programmed,
turn the VCR on, point the remote at the VCR, and press the VCR
button. Then press POWER or CHAN UP or DOWN to see if the
VCR responds to the remote commands.
Follow these steps to program your remote to control your VCR:
1. Turn on the VCR.
2. Look up your VCR brand and its code number on the code list
on the following pages.
3. Press and hold the VCR button.
4. Enter the code from the code list.
5. Release the device button and press POWER or CHAN UP/
DOWN to see if the VCR responds to the remote commands.
6. Repeat these steps using the next code listed for your brand
until the VCR responds to the remote commands.
62
This remote may not operate all
models of the brands that are
shown. Use the codes shown in
this manual, or on the sheet
packed with your remote.
After you program the remote to
control your TV, record your TV
code here for easy reference.
This remote may not operate all
models of the brands that are
shown. Use the codes shown in
this manual, or on the sheet
packed with your remote.
After you program the remote to
control your VCR, record your VCR
code here for easy reference.
Advertisement
Table of Contents
