Table of Contents
Advertisement
First Things First
Connection C
Good Picture and Sound Quality
To use this connection you must have:
•
TV with RF input (jack)
•
VCR with RF and audio/video inputs
•
Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box:
1. Connect coaxial cables and audio/video cables as shown.
To receive programming:
•
Tune TV to channel 3 or 4 (depending on how you set the
CH3/CH4 switch on the back of the receiver).
To receive off-air programming (no cable box):
1. Turn off VCR and receiver.
2. Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn off VCR and receiver.
2. Tune TV to cable box output channel (usually CH2, CH3, or
CH4).
3. Tune cable box to desired channel.
To record programming:
1. Tune TV to the channel on which you receive the signal.
2. Tune receiver to desired channel.
3. Set VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
2. Turn receiver off.
12
TV
IN
SATELLITE
OUT TO TV
RECEIVER
VIDEO
IN FROM ANT
CH4
VIDEO
CH3
VCR
IN FROM ANT
VIDEO IN
CH3
CH4
OUT TO TV
VIDEO OUT
CAUTION
Do not stack electronic
components or other objects on
top of the receiver. See Safety
Information, inside front cover.
SATELLITE
DISH
R
L
AUDIO
CABLE
SATELLITE IN
OR
R
L
AUDIO
OFF-AIR ANTENNA
AUDIO IN
R
L
AUDIO OUT
Advertisement
Table of Contents
