Home Connect® Settings; Remote Start; Remote Diagnostics; Software Update - Bosch SGV78B53UC Use And Care Manual

Follow the instructions in the
2.
Home Connect® app.
15.2 Home Connect®
settings
Adapt Home Connect® to your
needs.
You can find the Home Connect®
settings in the basic settings for
your appliance. Which settings the
display shows will depend on
whether Home Connect® has
been set up and whether the ap-
pliance is connected to your home
network.
15.3 Remote Start
You can use the Home Connect®
app to start the appliance with
your mobile device.
Tip: If you select "rc2" in the Ba-
sic settings → Page 35 of this
function, the function is perma-
nently activated, and you can start
your appliance with a mobile de-
vice at any time.
Activating Remote Start
When you have selected "rc1" in
the basic settings of this function,
activate the function on your appli-
ance.
Requirements
¡ The appliance is connected to
your WLAN home network.
¡ The appliance is connected to
the Home Connect® app.
¡ "rc1" is selected in the Basic
settings → Page 35 of this func-
tion.
¡ A program is selected.
Press ⁠ .
▶
If you open the appliance door,
the function is automatically de-
activated.
button lights up.
a
Home Connect® en-us
Tip: To deactivate the function,
press ⁠ .
15.4 Remote Diagnostics
The Customer Service can access
your appliance via Remote Diag-
nostics if you ask them to do so, if
your appliance is connected to the
Home Connect® server and if Re-
mote Diagnostics is available in
the country where you are using
the appliance.
Tip: Further information and de-
tails about the availability of Re-
mote Diagnostics in your country
can be found in the Service/Sup-
port section of your local website:
www.home-connect.com.
15.5 Software update
You can use this function to up-
date the software of your appli-
ance, e.g. for optimization, trou-
bleshooting or safety-relevant up-
dates.
The Home Connect® app informs
you about available software up-
dates.
15.6 Data Protection
Please see the information on

data protection.

The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the
following types of data to the
Home Connect® server (initial
registration):
¡ Unique appliance identification
(consisting of appliance codes
as well as the MAC address of
the installed Wi-Fi communica-
tion module).
¡ Security certificate of the Wi-Fi
communication module (to en-
sure a secure data connection).
37