Electrolux e:line EOEM61CS User Manual page 19

Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened
1. Switch off the appliance using the function selector
switch.
2. Press and hold the CLOCK and + buttons at the same
time until the word 'SAFE' is displayed and a double
beep is sounded. The word safe will be replaced by a
padlock symbol on the display after 5 seconds.
Re leasing the child-proof lock
1. Press and hold the CLOCK and + buttons at the
same time until a double beep is sounded. This will
commence to unlock the door and after 5 seconds
the oven is ready for use.
Switching the clock display ON and OFF
1. Press together + and – for 2 seconds to switch 'off'
the display.
2. Press together + and – for 2 seconds to switch the
clock display 'on' again.
3. When the display is set to the 'off' state pressing the
+ or – button momentarily will display the time for 5
seconds then turn off the display.
4. When the display is set to the 'off' state, turning on the
oven will turn the display 'on' for the duration of oven
operation. Once the function is turned 'off' the display
will turn off after 5 seconds.
Note: if a timer mode is set or the oven is operating, then it
is not possible to switch the display off.
Safety Cut-out feature
The oven automatically switches itself off if the temperature
is not adjusted or the appliance is left operating after a
period of time. The oven switches itself off after:
• 12.5 hours when the temperature is set less than 120°C.
• 8.5 hours when the temperature is set to 120°C or above,
and below 200°C.
• 5.5 hours when the temperature is set to 200°C or above,
and below 250°C
• 3.0 hours when the temperature is set at 250°C.
electrolux e:line ovens additional functionality – electronic control oven
DEMO Mode
The oven can be set to operate in a demo (eg in a retail
store) mode. In this mode the oven does not actually heat
If the oven has been inadvertently supplied in this mode.
The following instructions demonstrate how to exit this
mode.
1. Ensure the oven is in the off state. Press and hold the +
button until a beep sounds. The 'Demo' text will begin
to flash.
2. While holding the + button turn the function selector to
the first oven function until another beep is heard.
3. Then turn the function selector to the 'off' position.
4. Release the + button.
5. Toggle and hold the temperature selector to the right (+)
until 3 beeps sound.
The 'Demo' text will no longer be lit and the oven will
function normally. If the 'Demo' test is still present then
repeat the above procedure.
degree to which the oven is currently being heated.
19