Electrolux e:line EOEM61CS User Manual page 11

• Shelves and trays
The shelves are designed so that they have maximum
extension but cannot be accidentally pulled right out.
The trays are designed the same way and slot straight
into the side racks.
To fit a shelf or tray to side racks:
1. Locate the rear edge of the shelf/tray in between 2
guide rails of the side rack – see diagram. Ensure
the same rail positions on both sides of the oven are
being engaged.
2. With the front edge raised, begin to slide the shelf into
the oven.
3. Once the detents have passed the front edge of the
side rack, the shelf can be pushed completely in.
When fully inserted the shelf/tray should not interfere
with the closed oven door.
To fit a shelf or tray to telescopic slides:
1. With the slides fully pushed in, push the shelf or tray
along the top of the slide until it hits the back post.
2. Drop the front of the shelf or tray onto the slide
ensuring it sits behind the front post of the slide.
When fully inserted the shelf/tray should not interfere
with the closed oven door.
electrolux e:line ovens before using your electronic control oven 11
• Fat filter (if supplied)
The fat filter is designed to go onto the front of the fan
cover at the rear of the oven. When fully engaged the
filter will be positioned in the centre of the fan cover.
1. Locate the mounting slots in the fan cover and the
corresponding tags on the fat filter.
2. Position the fat filter onto the fan cover with the
tags pointing down.
3. Push the fat filter down into position.
tips and information
The fat filter should be cleaned regularly for best
cooking results.