Fcc Compliance Statement - DSC PC55O Instruction Manual

FCC Compliance Statement

CAUTION: Changes or modifications not expressly approved by Digital
Security Controls Ltd. could void your authority to use this equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications.
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Re-orient the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for
help.
The user may find the following booklet prepared by the FCC useful: "How
to Identify and Resolve Radio/Television Interference Problems". This
booklet is available from the U.S. Government Printing Office, Washington
D.C. 20402, Stock # 004-000-00345-4
Important Information
This equipment complies with Part 68 of the FCC Rules. On the side of
this equipment is a label that contains, among other information, the
FCC registration number of this equipment.
Notification to Telephone Company: Upon request, the customer shall
notify the telephone company of the particular line to which the connection
will be made, and provide the FCC registration number and the ringer
equivalence of the protective circuit.
FCC Registration Number: FCC Registration Number: F53CAN-20051-AL-E Ringer Equivalence FCC Registration Number: FCC Registration Number: FCC Registration Number:
Number: Number: Number: Number: 0.1B USOC Jack: Number: USOC Jack: USOC Jack: USOC Jack: RJ-31X USOC Jack:
Telephone Connection Requirements: Except for the telephone company
provided ringers, all connections to the telephone network shall be made
through standard plugs and telephone company provided jacks, or
equivalent, in such a manner as to allow for easy, immediate disconnection
of the terminal equipment. Standard jacks shall be so arranged that, if the
12
However, there is no guarantee that
Ringer Equivalence Ringer Equivalence Ringer Equivalence Ringer Equivalence
plug connected thereto is withdrawn, no interference to the operation of the
equipment at the customer's premises which remains connected to the
telephone network shall occur by reason of such withdrawal.
Incidence of Harm: Should terminal equipment or protective circuitry
cause harm to the telephone network, the telephone company shall,
where practicable, notify the customer that temporary disconnection of
service may be required; however, where prior notice is not practicable,
the telephone company may temporarily discontinue service if such
action is deemed reasonable in the circumstances. In the case of such
temporary discontinuance, the telephone company shall promptly notify
the customer and will be given the opportunity to correct the situation.
Additional Telephone Company Information: The security control
panel must be properly connected to the telephone line with a USOC
RJ-31X telephone jack. The FCC prohibits customer-provided terminal
equipment be connected to party lines or to be used in conjunction with
coin telephone service. Inter-connect rules may vary from state to state.
Changes in Telephone Company Equipment of Facilities:
telephone company may make changes in its communications facilities,
equipment, operations or procedures, where such actions are reasonably
required and proper in its business. Should any such changes render
the customer's terminal equipment incompatible with the telephone
company facilities the customer shall be given adequate notice to the
effect modifications to maintain uninterrupted service.
Ringer Equivalence Number (REN): The REN is useful to determine
the quantity of devices that you may connect to your telephone line and
still have all of those devices ring when your telephone number is called.
In most, but not all areas, the sum of the RENs of all devices connected
to one line should not exceed five (5.0). To be certain of the number of
devices that you may connect to your line, you may want to contact your
local telephone company.
Equipment Maintenance Facility: If you experience trouble with this
telephone equipment, please contact the facility indicated below for
information on obtaining service or repairs. The telephone company
may ask that you disconnect this equipment from the network until the
problem has been corrected or until you are sure that the equipment is
not malfunctioning.
Digital Security Controls Ltd. Digital Security Controls Ltd.
Digital Security Controls Ltd. Digital Security Controls Ltd. Digital Security Controls Ltd.
160 Washburn Street
Lockport, NY 14094
The