Display Messages; Before You Begin; Power Supply; Starting Up The Unit - RCA RP5020 User Manual

Display messages

ALL Select all (Introductory Play back & Erasing All Files)
EN
APPEND Appendix (Adding Appendix)
CUT-E
Cut End (Cutting)
CUT-S Cut Start (Cutting)
DELETE Delete (Erasing Selected File)
FULL Memory full
MM/DD
Month / day entry mode.
12 HOUR 12 hour time display mode.
TIME Time entry mode
INSERT Insertion (Inserting New Segments)
INTRO Introduction (Introductory Playback)
OFF Off (Automatic Voice Recording)
ON On (Automatic Voice Recording)
SEN 07 Sensitivity Level (AVR)
TONE Beeping sound on(Setting Beep Sound)
NO TONE
No beeping sound (Setting Beep Sound)
VOL 15 Volume (Setting Volume)
YEAR Year (Setting Year)
LOCKED Key locked
FORMAT
Format the memory
SPEED Speed of playback
WAIT... Unit is busy
* ( )- You can find the mentioned displays as you set/ operate them.
4

Before you begin

Power supply

This unit can be operated by 2 "AAA"
batteries.
Installing Batteries
(not included)
1. Slide the battery compartment door
to the bottom and lift up the door
to open.
2. Insert 2 "AAA" batteries with
polarities matching indications.
3. Replace the battery compartment
door.
Refer to the battery level
indicator on display for
batteries level. Replace
with new batteries when
the indicator is empty.
Auto power shut
down
The unit will be automatically turned
off if left idle for 3 minutes.
Using headphones
and external micro-
phone
• When headphones are connected,
sound output from speaker will be
muted.
• When external microphone is
connected, no record can be made
from built-in microphone.

Starting up the unit

Press PLAY to turn on the unit to start
playback or recording.

Keys lock

This feature avoids accidental key
activation during recording or
playback.
1. Press and hold MENU button for 3
seconds, LOCKED will be shown on
display. (LOCK icon will lit) s
2. Press and hold MENU button for 3
seconds again to unlock keys.

Tones

You can activate this feature so that
beep sound can be heard whenever you
press on any button except during
playback and recording.
1. Press MENU button
repeatedly until TONE
shows on display.
2. Press REVERSE or
FORWARD to set
beep sound ON/ OFF.
3. Press MENU to
confirm selection.
5
EN