Table of Contents
Advertisement
11 PRE EFFECT EQ, ON controls
12 COMPARE key
13 UTILITY key
14 BYPASS key
Downloaded from:
http://www.usersmanualguide.com/
This is a three-band parametric equalizer that equalizes the signal before the effect. The center
frequency and gain can be set for each band.
The ON key turns the pre-effect equalizer on/off. When the equalizer is on, the green indicator
will light.
Frequency
Gain
After editing the parameters of a program, you can use this key to compare the edited sound
with the sound of the program at the time it was recalled. When the red indicator is lit, you are
hearing the original sound of the program.
Use this key when you wish to make settings for system parameters such as memory protect,
input mode, and MIDI parameters. When you press the key, the red indicator will light.
When this key is pressed, the input signal will be output directly without passing through the
effect, and the red indicator will light.
This is a convenient way to quickly compare the unprocessed sound with the processed sound.
LOW
50 Hz to 700 Hz
350 Hz to 5 kHz
±15 dB
Front panel
MID
HIGH
2 kHz to 20 kHz
±15 dB
±15 dB
ProR3 Digital Reverberator
5
Advertisement
Table of Contents
