Washing The Product - Sharp AQUOS wish2 Quick Start Manual

Washing the Product

If any stain, dust, sand, soft drink, etc. is attached to the surface of the
product, gently wipe it off with a cloth and wash the product under a mild
water flow (up to 6 liters/min) of tap water at room temperature (5°C to 35°C)
approximately 10 cm away from the faucet or shower head.
Hold the SIM card/microSD memory card tray so that it does not open, and
wash the product with your hands without using a brush or sponge.
After washing the product, drain water off and then use the product.
• Make sure that the SIM card/microSD memory card tray is securely closed
before washing the product.
• Do not wash the product with a washing machine or an ultrasound bath.
• The earphone/microphone jack section and external connection jack
section are especially subject to stain such as dust or sand adhesion.
Wash away stain carefully so as not to keep it remaining in the sections.
Also, after washing it away, make sure the sections get sufficiently dried off
before using the product. Using the product with sand or water drops
remaining in the jack sections may cause fault.
• When cleaning the earphone/microphone jack section and external
connection jack section, do not use tools such as a cotton swab or jam a
cloth into the jack sections. Doing so may cause impairment of waterproof/
dustproof property etc., resulting in fire, burns, or a fault.
• Never put the product in a microwave oven for drying it. Doing so may
cause the internal battery to leak liquid, overheat, rupture or ignite. Also,
doing so may cause the product to overheat, emit smoke, ignite or cause
destruction of circuit components.
• Do not expose the product to hot air from a hair dryer or leave it in a high
temperature environment for drying it. Doing so may cause the product to
deform, discolor, get out of order, etc.
- 41 -