Removing & Installing Body Components; Battery - Honda CB500XA 2021 Manual

Removing & Installing Body Components

Battery

Negative
terminal
76
Rubber strap
Battery
Positive terminal
Removal
#
Make sure the ignition switch is in the OFF
position.
Remove the seat.
1.
2
Unhook the rubber strap from rear side.
2.
Disconnect the negative - terminal from the
3.
battery.
Disconnect the positive + terminal from the
4.
battery.
Remove the battery taking care not to drop
5.
the terminal nuts.
Installation
#
Install the parts in the reverse order of removal.
Always connect the positive + terminal first. Make
sure that bolts and nuts are tight.
Make sure the clock information is correct after
the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
2
P. 77
P. 31
2
P. 66
2
P. 105