Honda CB500XA Owner's Manual page 117

#
Rear Wheel
Removal
Place your motorcycle on a firm, level
1.
surface.
Support your motorcycle securely and
2.
raise the rear wheel off the ground using
a maintenance stand or a hoist.
Loosen the rear axle nut, lock nuts and
3.
turn the adjusting bolts so the rear wheel
can be moved all the way forward for
maximum drive chain slack.
Remove the drive chain from the driven
4.
sprocket by pushing the rear wheel
forward.
Remove the rear axle nut and washer.
5.
Remove the rear axle shaft and adjusting
6.
plates.
Tyre Puncture
Pulser ring
CB500XA only
Washer
Adjusting plate
Rear axle nut
Lock nut Adjusting plate Drive chain
Adjusting
bolt
Removing Wheels
u
Wheel speed sensor
CB500XA only
Lock nut
Adjusting bolt
Rear axle shaft
Continued
113