Table of Contents
Advertisement
Align the media guides [1] to the media roll width.
4
While holding the holder lock lever [2], slide the media holder [3] to fix the media roll securely.
Check that the printer printing surface has come upward.
Cut the edge of the media with scissors.
[1] Platen roller
[2] Paper sensor (Reflective sensor)
Load the media.
5
Pass the media through the media guides [1] and pull it until it reaches the front of the printer.
Do not squeeze the media too much with the media guides. Otherwise, the media will bend and this may cause
jamming or misfeeding.
Close the top cover.
6
For details, refer to P.23 "9. Opening and Closing the Top Cover".
Be sure to close the top cover completely. Otherwise, this may affect the print quality.
Press the [FEED] button.
7
Check that the media is fed correctly.
[1]
[ 1 ]
[ 2 ]
[ 1 ]
[ 3 ]
[ 2 ]
[ 1 ]
10. Loading the Media 25
Advertisement
Table of Contents
