Volvo XC90 Owner's Manual page 570

LOADING, STORAGE AND PASSENGER COMPARTMENT
||
4.
Attach the mounting bracket's hook
through the cargo anchoring eyelet near
the floor of the cargo compartment and
insert the threaded section of the bracket
through the grid's lower attachment hole
(1).
Slide the plastic sleeve onto the threaded
section of the mounting bracket with the
sleeve's flange turned upward and press it
down through the hole. Screw the screw
cover into place until its underside is
approximately 5 mm from the grid (2).
5. Repeat step 4 for the opposite side.
6. Center the grid and then tighten both
mounting brackets, moving back and forth
between them until the grid is securely in
place.
568
Removing the cover
Remove the steel grid by performing the
above steps in reverse order.
It can be a good idea to remove the mounting
brackets before removing the plastic sleeves
from the holes in the grid.
Related information
Loading recommendations (p. 561)
•
Load anchoring eyelets (p. 564)
•
Installing and removing the cargo
net*
The cargo net helps prevent objects in the
cargo compartment from entering the pas-
senger compartment in the event of a sudden
stop or hard braking.
The cargo net is attached at four points.
For safety reasons, the cargo net must always
be mounted and secured according to the fol-
lowing description.
The net is made of strong nylon weave and
can be attached in two different locations in
the vehicle:
Rear mounting - behind the second row of
•
seats.
Front mounting - behind the front seats.
•
* Option/accessory.