Samsung RR26 User Manual page 24

Installation
STEP 4 Remove the shipping switch cover
STEP 5 Initial settings
By completing the following steps, the refrigerator should be fully functioning.
1. Plug the power cord into the wall socket to turn the refrigerator on.
2. Open the door, and check if the interior light lights up.
3. Set the temperature to the coldest, and wait for about an hour.
4. Remove the 4 shipping caps from the shelf, which are attached for safe transportation.
5. Wait until the refrigerator reaches the set temperature.
Now the refrigerator is ready for use.
STEP 6 Final check
When installation is complete, confirm that:
• The refrigerator is plugged into an electrical outlet and grounded properly.
• The refrigerator is installed on a flat, level surface with a reasonable clearance from the
wall or the cabinet.
• The refrigerator is level and is sitting firmly on the floor.
• The door opens and closes freely, and the interior light turns on automatically when
you open the door.
24 English
OneDoor_RR3000NH_DA68-03111C-06_EN.indd 24
A
When installation is complete, remove the
shipping switch cover (A) before using the
refrigerator.
CAUTION
To prevent children from swallowing the
cover, keep the removed cover out of
children's reach.
2017-11-20 10:52:25