Table of Contents
Advertisement
STEP 2 Flooring
STEP 3 Adjust the levelling feet (if necessary)
OneDoor_RR3000NH_DA68-03111C-06_EN.indd 23
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each leg of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor.
If you have to, use a thick paper or cloth
such as old carpets along the movement
path.
Level the refrigerator by manually
adjusting the levelling feet.
Turn the levelling feet clockwise to lower
the position, or turn counter clockwise to
raise.
For safety reasons, adjust the front side a
little higher than the rear side.
NOTE
This model does not allow for adjusting the
front right foot that is fixed. Use the front
left foot for levelling.
English
23
2017-11-20
10:52:24
Advertisement
Table of Contents
