Table of Contents
Advertisement
Calibration Signal Reception
Precautions
•
Auto receive can be performed while the watch is in the
Timekeeping Mode or World Time Mode only.
•
The receive operation is disabled under any of the following
conditions.
•
When a timer operation is in progress
•
When the battery is dead
•
When the watch is in the recover mode
•
Pressing any button while auto receive is in progress will cause
the watch to exit the receive operation.
•
Make sure you are within the range of a calibration signal
transmitter before performing the receive operation. Remember
that geographic contours, nearby buildings, the season, or the time
of day can make reception impossible even when you are within
range of the transmitter.
•
Proper reception may be impossible if there is something blocking
the signal. If reception is unsuccessful, try again.
•
You will need to adjust the current time manually when using this
watch in an area that is not covered by receivable time calibration
signal.
•
When the watch is unable to adjust its time using the calibration
signal for some reason, timekeeping accuracy is as noted in the
specifications at the back of this manual.
•
Strong electrostatic charge can cause timekeeping error.
•
Receive is cancelled if an alarm operation starts while it is being
performed.
•
The watch's calendar shows dates up to the year 2099. Attempting
a receive operation after that causes an error.
38
Advertisement
Table of Contents
