Explanation of Jacks
This section describes the jacks you can use to make connections. There are several
combinations available to connect devices to your TV.
ANTENNA/CABLE
DIGITAL INPUT
ANTENNA/CABLE
DIGITAL INPUT
ANTENNA/CABLE
ANALOG INPUT
ANTENNA/CABLE
ANALOG INPUT
VIDEO IN
VIDEO
INPUT
VIDEO
AUDIO
INPUT
L
AUDIO
S-VIDEO
VIDEO
AUDIO
L
VIDEO IN
VIDEO
AUDIO
S-VIDEO
Chapter 1
DIGITAL INPUT Lets you connect a coaxial (RF) cable to receive digital
programming through your cable provider. Receive off-air digital programming via an
antenna. Refer to page 5 for more details.
ANALOG INPUT Lets you connect a coaxial (RF) cable to receive analog
programming through your cable provider. Receive off-air programming via an
antenna. Refer to page 5 for more details.
Use the ANTENNA button to toggle between these RF inputs.
ANTENNA/CABLE
DIGITAL INPUT
VIDEO IN Lets you connect devices which have Audio/Video (composite) outputs
such as VCRs, DVD players, satellite receivers, cable boxes, camcorders and video
game consoles. Connect the left and right audio jacks for sound.
ANTENNA/CABLE
VIDEO Provides composite video connection. The video connector is usually
•
ANALOG INPUT
yellow.
S-VIDEO
R
IN
AUDIO-L Provides left audio connection. The left audio connector is usually
•
S-VIDEO
R
white.
IN
ANTENNA/CABLE
DIGITAL INPUT
AUDIO-R Provides right audio connection. The right audio connector is usually
R Provides right audio connection. The right audio connector is usually
R
•
red.
To access the device when using these jacks, use the INPUT button on your remote
until VID1 appears.
ANTENNA/CABLE
ANALOG INPUT
- OR -
S-VIDEO Lets you connect external devices which have S-Video outputs such as:
VCRs, DVD players, satellite receivers and cable boxes. Connect the left and right audio
jacks for sound. Refer to page 7 for a detailed explanation of how to connect S-Video
cables to your TV.
AUDIO-L Provides left audio connection. The left audio connector is usually
•
white.
AUDIO-R Provides right audio connection. The right audio connector is usually
R
R Provides right audio connection. The right audio connector is usually
•
red.
To access the device when using these jacks, use the INPUT button on your remote
until SVID appears.
VID
VID appears.
Remember: If you use the S-Video connection described here, you cannot use the
VIDEO IN connection at the same time.
Connections & Setup
15