Table of Contents
Advertisement
Select the Digital Output option from the
Sound menu.
Chapter 5
Graphics contained within this publication are for representation only.
Digital Output
Digital output lets you choose which type of digital audio is
output from your unit. If you've used an optical cable to
connect a Dolby Pro Logic, Dolby Digital, or DTS receiver, you
must adjust this setting. There are two options:
• Dolby Digital: Choose this setting if you connected a
Dolby Digital receiver.
• DTS: Choose this setting if you connected a DTS receiver
or decoder to your unit.
The default is Dolby Digital. To change the digital output:
1. From the main menu, highlight and select the Sound
option and press OK (the Sound menu is displayed).
2. Highlight the Digital Output option and press OK.
3. Highlight the desired output and press OK.
4. Press the left arrow key to return to the main menu.
Notes: If you set Digital Output to DTS, you must have your unit
connected to a receiver or decoder with the DTS feature and the disc
you play must support the DTS audio format. If you choose DTS and
your receiver or decoder doesn't support DTS, you won't hear any
audio.
If you don't want to make any changes, press CLEAR to return to the
main menu or GO BACK to return to the Speaker Setup menu.
Using the DVD Menu
41
Advertisement
Table of Contents
