c
fan duct
d
cover
5
Follow the procedure in
Removing the intrusion switch
1
Follow the procedure in
2
Remove the:
a
cover
b
fan duct
3
To remove the intrusion switch:
a
Disconnect the intrusion switch cable from the connector on the system board [1][2].
b Slide the intrusion switch and lift it away from the computer [3].
Installing the intrusion switch
1
Insert the intrusion switch into the slot on the chassis.
2
Connect the intrusion switch cable to the system board.
3
Install the:
a
fan duct
b
cover
4
Follow the procedure in
Removing the expansion card
1
Follow the procedure in
2
Remove the:
a
cover
b
fan duct
3
To remove the expansion card:
a
Pull the metal tab to open the expansion card latch [1].
b Pull the tab forward [2] and pull the expansion card from the connector on the computer [3].
After Working Inside Your
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
Computer.
Removing and installing components
9