Controlling Focus After Recording (Post Focus/Focus Stacking) - Panasonic LUMIX DMC-G80M Assembly And Operating Instructions Manual

•
When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera temperature
rises. Select [ ] ([4K Pre-Burst]) only when recording.
•
When the ambient temperature is high or 4K photo recording is performed continuously, the
camera may display [
setting changes to [
Selecting pictures from 4K burst file and saving
•
The picture will be saved in JPEG format.
1
Select an image with the [
press 3.
•
If the image was recorded with [
2
Drag the slide bar to make a rough selection of
scenes.
3
Drag the frames to select the frame you want to save
as a picture.
4
Touch [
Controlling Focus After Recording
Stacking)
Applicable modes:
The camera can perform Burst recording in the same picture quality as 4K photo recording
while automatically shifting the focus to different areas. After the recording, you can select
the desired area on the screen and save a picture in which the selected area is in focus.
You can also merge multiple pictures with different focus areas to widen the focus range.
(Focus Stacking)
•
We recommend that you use a tripod when recording images to be used for Focus Stacking.
•
Use a UHS Speed Class 3 card. (P9)
•
The angle of view becomes narrower when the Post Focus function is in use.
] and recording may stop. (If [
] ([4K Burst]) before recording stops.) Wait until the camera cools down.
] icon on the playback screen, and
] to save the picture.
] ([4K Pre-Burst]) is selected, the
] ([4K Pre-Burst]), proceed to step
Recording
3
.
Fn1 Fn2
(Post Focus/Focus
(ENG) DVQX1015
29