Westinghouse WVE614 Series Quick Start Manual page 2

Set...
Installing the oven accessories
1. Insert side racks
There is a left hand and right hand
version (see image for details).
1. Insert the rear peg into the rear
access hole provided,ensuring that
the peg is fully inserted.
2. Then locate the front peg into
the front access hole and push
in firmly.
2. To fit a shelf or tray to side racks:
1. Locate the rear edge of the
shelf/tray in between 2 guide
rails of the side rack - see
diagram.
2. Align the shelf to the same rail
positions on both sides, with
the front edge raised, begin to
slide the shelf into the oven.
3. When fully inserted the shelf/
tray should not interfere with
the closed oven door.
Condition the oven
(to burn off any residue)
New appliances can have oil or
residue left from manufacturing.
You will need to heat your oven
for 30 minutes before using it for
the first time.
1. Ensure the "Auto Off" timer is
set to "Off".
2. Turn the function selector dial
to FAN FORCED
3. Using the temperature selector,
set the oven at 180°C for
approximately 30 minutes.
Please ensure that the room
is well ventilated during this
process.
Left hand side rack
front peg rear peg
Detent