2. Insert the wireless WAN card into the slot at an angle of about 20 degrees
Install the screw to secure the wireless WAN card.
connector, the black with grey cable to
cable to
d
connector as shown
M.2 solid-state drive and bracket
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Attention: If you replace a M.2 solid-state drive, you might need to install a new operating system. For
details on how to install a new operating system, see "Install a Windows operating system and drivers" on
page 45.
The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and permanent loss of
data.
52
X1 Carbon Gen 11 and X1 Yoga Gen 8 User Guide
3
. Ensure you connect the blue cable to
b
connector, the white cable to
4
.
and print the following instructions.
1
, and pivot downward
a
c
connector, and the orange
2
.