Sd Card Reader; Removing Sd Card Reader - Dell Precision 7780 Service Manual

Next steps
1. Install the battery.
2. Install the secondary solid-state
3. Install the primary solid-state
4. Install the base cover.
5. Follow the procedure in

SD card reader

Removing SD card reader

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the primary solid-state
4. Remove the secondary solid-state
5. Remove the battery.
6. Remove the inner frame.
About this task
The figure indicates the location of the SD card reader and provides a visual representation of the removal procedure.
Steps
1. Disconnect the SD card reader flat printed cable (FPC) and LED board FFC from their connector on the SD card reader.
2. Remove the (M2x2) screw that secures the SD card reader on the computer chassis.
3. Lift to remove the SD card reader with its FPC out of the computer.
drive.
drive.
after working inside your
before working inside your
drive.
drive.
computer.
computer.
Removing and installing components 65