Drainage System - Whirlpool AWZ 9811 Quick Reference Manual

DRAINAGE SYSTEM

For water container top only
To avoid having to empty the
water container at the end of
each cycle, the condensation
water can be drained away.
Note: Normally the drain hose is
not supplied; the accessory AMH
883 kit, available at your dealer or
our After Sales Service, should be
used.
The connection for direct
draining is at the rear of the
dryer.
A. Place an absorbent cloth
underneath to collect water
spillage.
B. Remove the hose located at the
lower rear part of the dryer and
insert it in the nearby hole.
C. Fix the hose (length: 1.5 m) to the
outlet connection. The height
difference between the two
drainage connections should not
exceed 1m.
Notice: To avoid siphoning, the end
of the hose must not be
immersed in the drain water.
Avoid bending and twisting
the hose.
40
B
C