Changing the tolerance for the
automatic speed limiter
The Automatic Speed Limiter function
46
(ASL
) can be set for different tolerance lev-
els. The tolerance is adjusted in the same way
as the speed setting is in the speed limiter.
If, for example, the car follows a signed speed
limit of 70km/h (43 mph) the driver can
instead choose to allow the car to maintain
75 km/h (47 mph).
Buttons and symbols for the function
46
Automatic Speed Limiter
47
Automatic Speed Limiter
48
Road Sign Information – RSI
Press the steering wheel button
–
until 70 km/h (43 mph) in the centre of
the speedometer (2) changes to 75 km/h
(47 mph).
> After which, the car uses the selected
tolerance 5 km/h (4 mph) as long as
signs passed are showing 70 km/h
(43 mph).
The tolerance is followed until a road sign with
a lower or higher speed is passed - then the
car follows the new signed speed limit instead
and the tolerance is deleted from the memory.
NOTE
The maximum selectable tolerance is
+/- 10 km/h (5 mph).
Related information
Automatic speed limiter (p. 336)
•
Limitations for automatic speed limiter
•
(p. 339)
Road Sign Information* (p. 326)
•
Limitations for automatic speed
(1)
limiter
Automatic speed limitation (ASL
place using speed information from the Road
Sign Information function* (RSI
the speed limit road signs that the car
passes.
If road sign information cannot interpret and
provide speed information to the driver sup-
port systems, the automatic speed limiter is
set in standby mode and changes to normal
speed limiter. In such cases the driver must
intervene and brake to a suitable speed.
The automatic speed limiter will be reactivated
when road sign information can once again
interpret and provide speed information.
Related information
Speed limiter (p. 333)
•
Automatic speed limiter (p. 336)
•
Road Sign Information* (p. 326)
•
DRIVER SUPPORT
47
) takes
48
) – not from
339
* Option/accessory.