Advertisement
Good Faith Guidelines for TV Installations Above Appliance - Portrait Decorative Front
TV on the wall
TV Wall
Bracket
Appliance
Notes:
1. These are good faith recommended clearances only and not a guarantee of compliance with all TV
manufacturers' maximum allowable operating temperatures.
2. Since every home has unique air flow characteristics and maximum allowable operating temperatures
can vary from manufacturer to manufacturer and from model to model, actual TV temperatures should
be validated at the time of each installation. TVs should not be used in situations where the actual TV
temperature exceeds the manufacturers' maximum allowable operating temperatures identified in the
TV's technical specifications. Contact the TV's manufacturer directly if you cannot locate this
information or have questions regarding the information.
3. Mantel height and depth must conform to mantle requirements specified in the appliance installation
manual.
4.
"C" dimension taken from the top of the hood or appliance opening.
5.
Suggestions on how to further reduce TV temperatures:
a.
Increase "A" dimension.
b. Increase "C" dimension, however, increasing "B" dimension beyond maximum recommended
typically results in higher temperatures.
Figure 5 Good Faith TV Guidelines - Portrait Decorative Front
3
TV
Item
Minimum Dimensions
A
2.5 inches
B
2 inches minimum to 3 inches maximum
Passive Heat NOT Installed = 18 inches
C
Passive Heat Installed = 6 inches
D
Wall Brkt + TV Thickness + 2.5 inches
A
B
Mantel
D
C
Appliance Opening
Heat & Glo • Portrait Decorative Front Instructions • 2581-930 Rev. C • 8/22
TV recessed into the wall
B
A
C
Appliance Opening
Appliance
Advertisement
