Table of Contents
Advertisement
•
CAT5 UTP or better twisted-pair
•
22-26 AWG, 100Ω @ 1 MHz
•
EIA/TIA 568a or EIA/TIA 568b
NOTE:
comply with the IEEE 802.3ab 1000Base-T standard. For new installations, CAT5e (enhanced
CAT5) or better cable is recommended. Maximum distances for Gigabit over copper cable are
100 meters (328 feet).
RJ-45 pinouts and crossover function
The Ethernet standard also specifies that each segment implement a crossover function to connect the
transmitter of one device to the receiver of a device at the other end, and vice-versa. The crossover
function may be implemented internally at the hub or switch or externally through the twisted-pair media.
10/100 pinouts using internal, straight-through crossover
If the crossover function is implemented internally, the port is labeled MDI-X (Medium Dependent Interface-
Crossover). When an MDI-X port is connected to an MDI port, the twisted pair media should be wired
straight-through using the physical pinouts indicated.
Pin
1
2
3
4
5
6
7
8
For Gigabit over copper installations, CAT5 UTP or better 1000Base-T cable must
Function
Color match
TD+
Orange
TD-
Orange/White
RD+
Green
Blue/White
Blue
RD-
Green/White
Brown
Brown/White
Function
Pin
TD+
1
TD-
2
RD+
3
4
5
RD-
6
7
8
Specifications 12
Advertisement
Table of Contents
