Table of Contents
Advertisement
Web User Interface
Enter the IP address or network address that will be used in the IP filter rule. In the following example, if the IP addresses 192.168.70.66 or
192.168.70.0 are entered, they would be inaccessible to wireless clients on the same network.
Wireless Band
Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
SSID Index
Click the drop-down menu to select the SSID for
the IP filter..
Filter State
Click the drop-down menu to enable or disable
the filter state. By default this feature is disabled.
IP Address
Enter the IP address or network address to apply
the filter settings.
Subnet Mask
Enter the subnet mask of the IP address or
networks address.
IP Address List
When an IP address is entered, it appears in the
list.
Highlight a IP address and click Delete to
remove it from the list.
Upload IP Filter File
To upload a IP filter list file, click Browse... and
navigate to the IP filter list file saved on the
computer, and then click Upload.
Download IP Filter File
To download IP Filter list file, click Download
and to save the IP filter list.
Save
Click to save the updated configuration.
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-2620 User Manual
IP Filter Settings
63
Advertisement
Table of Contents
