Sony ILCE-9 a9 Help Manual page 167

Help Guide
Interchangeable Lens Digital Camera
ILCE-9
α9
Zebra
The zebra pattern will appear over part of an image if the brightness level of that part meets the IRE level that you set.
Use this zebra pattern as a guide to adjust the brightness.
MENU → (Camera Settings2) → [Zebra] → desired setting.
1
Menu item details
Off:
Does not display the zebra pattern.
70/75/80/85/90/95/100/100+/ Custom1 /Custom2:
Adjusts the brightness level.
Hint
You can register values to check the correct exposure or overexposure as well as the brightness level for [Zebra]. The settings for
correct exposure confirmation and overexposure confirmation are registered to [Custom1] and [Custom2] respectively in the
default settings.
To check the correct exposure, set a standard value and the range for the brightness level. The zebra pattern will appear on
areas that fall within the range you set.
To check the overexposure, set a minimum value for the brightness level. The zebra pattern will appear over areas with a
brightness level equal to or higher than the value you set.
Note
The zebra pattern is not displayed on devices connected via HDMI.
4-691-927-15(2) Copyright 2017 Sony Corporation
167