Craftsman 137.418000 Operator's Manual page 15

UNPACKING YOUR STAND
This product requires assembly.
1. Remove the stand and all parts from the carton.
2. Place the stand on the ground.
3. Separate all parts from the packing material. Check each one with the
illustration below to make certain all items are accounted for before discarding
any packing material.
WARNING
!
If any part is missing or damaged, do not attempt to assemble the stand until
the missing or damaged part is correctly replaced.
Long Bottom Support
Brackets (22-1/4 in.)
Short Bottom Support
Brackets (16-3/16 in.)
Stand Legs
Short Upper Support
Brackets (11-27/32 in.)
15
Long Upper Support
Brackets (18-1/16 in.)
Hardware Bag