NEC NP-NC1000C User Manual page 54

5. Maintenance of Your Projector
5-3-3. Procedure for Replacing the Lamp and Air Filter
• Step 1
Replace the lamp (See page 54)
• Step 2
Replace the rear air filter (See page 58)
Replace the side air filter (See page 61)
• Step 3
Reset the lamp usage time and air filter usage time (See page 63)
5-3-4. Replacing the Lamp
This section describes the procedure for replacing both of the lamps.
Preparation: Have a Phillips head screwdriver ready.
1
Remove the lamp cover.
1. Loosen the screw securing the lamp cover until the Phillips screwdriver goes into a free-
wheeling condition.
The screw is not removable.
2. Grasp the standoff pillar of the screw securing the lamp cover and pull it up towards you to
remove the lamp cover.
54