Husqvarna 701 Enduro 2018 Owner's Manual page 151

–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
–
Remove cover
–
Press the brake caliper onto the brake disc by hand in order
to push back the brake pistons. Ensure that brake fluid does
not flow out of the brake fluid reservoir, extracting it by suc-
tion if it does.
V00502-11
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake pis-
tons.
–
Remove cotter pin
striking it, and remove the brake linings.
–
Clean the brake caliper and brake caliper support.
400418-11
BRAKE SYSTEM 13
1
.
2 3
with membrane .
4 5
, remove pin toward the right by
149