Seagate ST6000NM0245 Product Manual page 2

Enterprise capacity 3.5 hdd
Table of Contents

Advertisement

Document Revision History
Revision
Date
Rev. A
06/28/2016
Rev. B
09/01/2016
Rev. C
04/05/2017
Rev. D
10/06/2017
Rev. E
11/20/2017
© 2017 Seagate Technology LLC. All rights reserved.
Publication number: 100804239, Rev. E November 2017
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. PowerChoice, Raid Rebuild and
SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a
certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments.All other trademarks or registered trademarks are the property of their
respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.
Call 877-PUB-TEK1 (877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer's operating system may use a different
standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage.
Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment
and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for
more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.
Pages affected and Description of changes
Initial release.
8: Added Korean text for Class B device warning
41: Changed Information Exception Log Page 2Fh to "Y"
24: Changed Idle_C 12V Amps to 0.38 & Watts to 6.21
7-11: Updated Sections 2.1 through 2.3.3
29: Updated Figure 3. Location of the HDA temperature check point
33 & 37: Updated fastener penetration depth to 0.120 in. in Fig. 5 & text
11: Updated Table 2: Taiwan - Restricted Substances - Unit row headers = HDD & PCBA
29: Updated Figure 3: Location of the HDA temperature check point
33 & 37: Updated fastener penetration depth in Fig. 5 & Section 10.0 = 0.140 in.

Advertisement

Table of Contents
loading

Table of Contents