Replacing The Shaving Heads - Philips NORELCO 5000 Series Manual

ENGLISH
20
C
1 For best results rinse the shaving unit by
running under hot water for a few minutes.
C
2 Press the Shaver Head Release Button to
open the shaving unit.
C
3 Rinse the shaving head holder under hot
tap water for 30 seconds.
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
4 Carefully shake off excess water and let
the shaving head holder air dry completely.
5 Close the shaving head holder. You will
hear a 'click'.
Cleaning the Trimmer
Clean the trimmer after each use.
C
1 Attach the trimmer to shaver.
2 Turn shaver ON.
C
3 Rinse the trimmer under hot water. BUT
BE CAREFUL TO TEST WATER FIRST SO
AS NOT TO BURN OR SCALD HANDS.
C
4 Turn the shaver OFF. Shake off excess
water and allow trimmer to air dry
thoroughly.
Tip: For optimal trimmer performance, lubricate
the trimmer teeth with one drop of mineral
oil every 6 months.

Replacing the Shaving Heads

Q Replace the shaving heads once a year for
optimal shaving results.
Q Replace damaged or worn shaving heads with
model SH50 Philips Norelco shaving heads
only.
Replacement Shaving Heads
Indication
C
Q The shaving unit symbol lights up continuously
when the shaver is turned off to remind
you to replace your shaving heads to obtain
optimal shaving results.
ENGLISH
21