Table of Contents
Advertisement
Main Menu
Driving Position Memory System
Doing any of the following after
pressing the MEMO button will
cancel the storing procedure.
Not pressing a memory button
●
within 5 seconds.
Readjusting the seat position.
●
Readjusting the outside mirror
●
position.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
158
Table Of Contents
Selecting a Memorized Position
To select a memorized position, do
this:
1. Make sure the vehicle is parked.
2. Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
The system will move the seat,
steering wheel, and outside mirrors
to the memorized positions. The
indicator in the selected memory
button will flash during movement.
When the adjustments are complete,
you will hear two beeps, and the
indicator will remain on.
To change the ''MEMORY
POSITION LINK'' setting, see page
98.
2009 MDX
To stop the system's automatic
adjustment, do any of these actions:
Press any button on the control
●
panel: MEMO, 1, or 2.
Push any of the adjustment
●
switches for the seat.
Shift out of Park.
●
Adjust the outside mirrors.
●
If desired, you can use the
adjustment switches to change the
positions of the seat, steering wheel
or outside mirrors after they are in
their memorized position. If you
change the memorized position, the
indicator in the memory button will
go out. To keep this driving position
for later use, you must store it in the
driving position memory.
Advertisement
Chapters
Table of Contents
