Sony FW-98BZ50L Reference Manual page 3

Hide thumbs Also See for FW-98BZ50L:
Table of Contents

Advertisement

Available languages

Available languages

FCC Related Information
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or LCD Display reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/LCD Display
technician for help.
Pursuant to FCC regulations, you are cautioned that any
changes or modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Safety and Regulatory
FCC regulations restrict operation of this device to indoor
use only.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice for customers in Canada
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada's licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
To prevent radio interference to the licensed service, this
device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is subject to
licensing.
High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
Notice for customers in the United States
of America and Canada
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the
radiator at least 20 cm or more away from person's body
(excluding extremities: hands, wrists, feet and ankles).
This device and its antenna(s) must not be co-located or
operating with any other antenna or transmitter except
Grant condition.
Sony Products can be returned for recycling to a number of
locations throughout the United States and Canada.
Visit www.sony.com/ecotrade for details.
Compatible Wall-Mount Bracket
Information
Use the following Sony Wall-Mount Bracket with your LCD
Display model.
Sony LCD Display Model No.
75BZ30L / 65BZ40L / 65BZ35L /
65BZ30L / 55BZ40L / 55BZ35L /
Sony Wall-Mount
Bracket Model No.
Use with other Wall-Mount Brackets*
and could result in property damage or injury.
*1 Only for limited region/country/model.
*2 For instructions on using the Wall-Mount bracket with
your LCD Display please go to https://www.sony.com/
am/support for your LCD Display model and download
"Wall-Mount Bracket".
Compatible Table-Top Stand Information
Use the following Table-Top Stand accessory with your LCD
Display model.
Sony LCD Display Model No.
FW-43BZ30L
Table-Top
Stand
FWA-ST1L
Model No.
To Customers
Sufficient expertise is required for LCD Display installations.
Be sure to subcontract the installation to a Sony dealer or
licensed contractor and pay adequate attention to safety
during the installation.
Before setting up your LCD Display
Some LCD Display models are packaged with a detached
Table-Top Stand so you can mount your LCD Display to a
wall right away. See "Installing the LCD Display to the Wall"
if you want to mount the LCD Display to a wall. If you are
not mounting the LCD Display to a wall, you will need to
attach the Table-Top Stand (refer to the Setup Guide).
(Models with Table-Top Stand only)
Be sure to consider the following while setting up your LCD
Display:
• Disconnect all cables when carrying the LCD Display.
• Two or more persons (three or more persons for 214.8 cm
(85 inches), four or more persons for 247.7 cm (98 inches)
and above LCD Display) are needed to transport a large
LCD Display.
• Correct hand placement while carrying the LCD Display is
very important for safety and to avoid damage.
FW-75BZ40L / 75BZ35L /
55BZ30L
1
SU-WL855*
2
may cause instability
FW-65BZ40L /
65BZ35L /
65BZ30L /
FW-50BZ30L
55BZ40L /
55BZ35L /
55BZ30L
FWA-ST2L
FWA-ST3L
3
EN
EN
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents