Table of Contents
Advertisement
uuReplacing Light BulbsuFront Turn Signal Light Bulbs
Front Turn Signal Light Bulbs
When replacing, use the following bulbs.
Front Turn Signal Light: 24 W (PWY 24W Amber/Silver)
Inner Fender
454
1. Turn the steering wheel all the way to the
Clip (B)
opposite side from the light being replaced.
Passenger's side: Turn the steering wheel
to the left.
Driver's side: Turn the steering wheel to
the right.
2. Remove the holding clips (A) and (B), pull
the inner fender back.
Clip (A)
3. Turn the cover counter-clockwise and
remove it.
Cover
1Front Turn Signal Light Bulbs
Holding clip (A-type)
Insert a flat-tip screwdriver, lift and remove the center
pin to remove the clip.
Insert the clip with the center pin raised, and push
until it is flat.
Push until the
pin is flat.
Advertisement
Chapters
Table of Contents
