Acura TLX 2017 Manual page 405

uuBrakinguBrake System
■
Automatic Brake Hold
Keeps the brake applied after releasing the brake pedal until the accelerator pedal is
pressed. You can use this system while the vehicle is temporarily stopped, such as
when you stop at a traffic light.
■
Turning on the system
On
Automatic Brake
Hold Button
Fasten your seat belt
properly, then start the
engine. Press the
automatic brake hold
button.
The automatic brake
●
hold system indicator
comes on. The system
is turned on.
404
■ ■
Activating the system
On
On
U.S.
Brake Pedal
On
Canada
Depress the brake pedal Depress the accelerator
to come to a complete pedal while the
stop. The transmission transmission is in
must be in or . The system is canceled
( D N (
and the vehicle starts to
The automatic brake
●
move.
hold indicator comes
●
on. Braking is kept for
up to 10 minutes.
● Release the brake
pedal after the
automatic brake hold
indicator comes on.
1Automatic Brake Hold
Activating the automatic brake hold system
on steep hills or slippery roads may still
allow the vehicle to move if you remove
Canceling the system
your foot from the brake pedal.
If a vehicle unexpectedly moves, it may
On
cause a crash resulting in serious injury or
death.
Goes
Off
Never activate the automatic brake hold
Accelerator Pedal
system or rely on it to keep a vehicle from
moving when stopped on a steep hill or
slippery roads.
.
( D
Using the automatic brake hold system to
park the vehicle may result in the vehicle
unexpectedly moving.
The automatic brake
hold indicator goes
If a vehicle moves unexpectedly, it may
off. The system
cause a crash, resulting in serious injury or
continues to be on.
death.
Never leave the vehicle when braking is
temporarily kept by automatic brake hold
and always park the vehicle by putting the
transmission in
brake.
WARNING
3
WARNING
3
and applying the parking
P (