Napoleon NEFBD60HE Installation And Operation Manual page 23

Ember Bed
Colour
Flame Speed
Heater
Timer
Temperature
Control
operating instructions
Controls ember bed light settings.
NOTE: Ember bed brightness must be between B-4 and B-1
to control ember bed colour.
Settings:
L01 - Orange
L02 - Red
L03 - Blue
L04 - Yellow
L05 - Green
L06 - Purple
L07 - Sky Blue
L08 - Purple Red
L09 - White
L10 - Pink
L11 - Yellow Green
L12 - Ice Blue
L13 - Orange Red
L14 - Light Green
L15 - Magenta
L16 - Autocycle
L17 - Lock a colour during L16 cycle
Controls fl ame speed.
Settings: S-3, S-4, S-5, S-1, S-2
Turns the heater and blower on/off.
Settings:
H-0 - Heater and blower off
FAN - Blower on
H-1 - Heater on
(750W each side @ 120V / 1500W each side @ 240V)
LOC - Lock-out of heater and thermostat
NOTE: Press and hold the heater button for 5 seconds to
lock / unlock the heater and thermostat.
NOTE: Each side of the appliance has an independent heater
control.
Sets the timer.
Settings:
30M, 1Hr, 2Hr, 3Hr, 4Hr, 5Hr, 6Hr, 7Hr, 8Hr.
NOTE: The display will read "---" after completing the 9 timer
settings.
Sets desired temperature.
Settings:
18°C (64°F), 19°C (66°F), 20°C (68°F), 21°C (70°F), 22°C
(72°F), 23°C (74°F), 24°C (76°F), 25°C (78°), 26°C (80°F),
27°C (82°F), and OFF.
To switch between °C and °F or vice versa, hold the tempera-
ture control button for 5 seconds.
EN
23
W415-2107 / D / 04.15.20