Removing The Embroidery Foot - Brother SE1800 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Removing the embroidery foot

a Press
twice to raise the needle.
a "Needle Position" button
b Turn off the sewing machine.
CAUTION
● Before removing the embroidery foot, be
sure to turn off the sewing machine.
Otherwise, injuries may occur if one of
the operation buttons is accidentally
pressed and the machine starts sewing.
c Raise the presser foot lever.
a Presser foot lever
The presser foot is raised.
("Needle Position" button) once or
d While pressing in the lever at the back of the
embroidery foot with your finger, loosen the
presser foot holder screw, and then remove
embroidery foot "Q".
Turn the screwdriver toward the back.
e Attach the presser foot holder.
• For details, refer to "Attaching the presser
foot holder" (page 46).
Attaching the Embroidery Foot 149
4