Download Print this page

Bajaj pulsar ns160 2023 Owner's Manual page 12

Advertisement

12. Engine REV Indicator: (
) It glows when engine RPM is between
RPM
LIMIT
10,000 ~ 10,500 RPM. continuously ON at RPM more than
10,500.
13. Gear Indication: It will display gear position from 1 to 5. It will
display "N" when vehicle is in neutral position.
14. Side Stand Indicator: It glows when side stand is down. starter
will be disabled if side stand down - with side stand down condition
& vehicle in gear, engine cranking is disabled through ECU
15. Digital Clock: It indicates time in HR: MM (AM/PM)
16.Speedometer: Vehicle speed will be displayed in digital form in Km/h
17. Odometer: The Odometer shows the total distance that the
vehicle has covered. Odometer can not be reset to 'Zero'.
20
18. Service Reminder: 'Wrench' symbol glows when ODO meter
reading reaches to set Kms. It indicates vehicle is due for
periodic service. This Icon will flash at -
1st: 450 km
2nd: 4450 km,
and subsequently at each 5000 kms. Icon will continue to glow
till it is reset. This icon is to be reset after service is carried out.
19. Trip Meter: Trip 1 & Trip 2 shows the distance traveled since it
was last reset to zero.
20. Set Button: Set button used for toggling between ODO to IFE,
Trip1 to AFE1,Trip2 to AFE2,DTE to distance to next service and
clock setting.
8
12
13
14
15
16
17
18
19
3rd: 9450 km

Advertisement

loading