Table of Contents
Advertisement
13.8 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press Start /
Pause.
To resume the programme, after
3.
the desired soaking time, press
Start / Pause.
13.9 Adding laundry
Press Start / Pause.
1.
The appliance pauses.
appears, it is not pos-
Note: If
sible to add laundry.
When
goes out, it is possible to
add laundry.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press Start / Pause.
5.
13.10 Cancelling the pro-
gramme
Press Start / Pause.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→ "Programmes", Page 23
Remove the laundry → Page 29.
3.
13.11 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→ "Buttons", Page 22
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the Spin programme or a pro-
1.
gramme for draining the water.
→ "Programmes", Page 23
Press Start / Pause.
2.
13.12 Unloading the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.13 Switching off the appli-
ance
Turn the programme selector to
1.
Off.
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.
operation en
29
Advertisement
Table of Contents
